All data is for information only------(<---links)
	PRODUCT DATA of AISI 410S

Material	AISI 410S
Product Datasheet	410S_Data_Sheet
General Information	Martensitic stainless steel
Chemical Composition	Fe-12.3Cr-0.06N-0.4Ni-0.4Mo-0.08C

	PHYSICAL PROPERTIES

Crystal Structure	Face centered cubic (fcc)
Magnetic Properties	Ferromagnetic

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

General Corrosion Status	No specific corrosion protection required
Stress Corrosion Status	Moderate Resistance to SCC: Table 2 Remark:Tempering between 371oC and 593oC shall be avoided because corrosion and stress corrosion cracking resistance is lowered. Requires Stress corrosion evaluation form Data Quality: Design Data
EMF vs SCE	-0.17 V Remark:Measured in 3.5% NaCl solution. Passive condition Data Quality: Design Data
Bimetallic Corrosion	Can be connected without any restriction to: Cr, Au, Ag, Gun-metal, P-bronzes, Sn-bronzes, Ti+alloys, Ni, Monel, Inconel, Ni/Mo alloys Can be connected in a non-controlled environment to the above and Cd, austenitic cast iron, Cu, Brasses, Al-bronzes, Si-bronzes, Au, Pt, C, Rh, Sn-Pb alloys, Sn, Pb, 300 series stainless steels Can be connected in a clean room environment to above and Al-Cu alloys Needs specific measures: All others Test:ECSS-Q-ST-70C Rev.1 Table 5.1 Data Quality: Design Data